Opening state monitoring VdS Cl. B
100 10 30 C
Article number:
1300840
Recess-mounted magnetic contact for opening detection that can be used in different ways as a change-over contact. The large number of combinable installation parts (see “Possible installation parts”) makes this contact suitable for use in many applications depending on the environmental requirements.
Comments
| Comment | With special magnets, this product can also be used for combined lock and opening state monitoring. For more information, see the chapters with the same names. |
|---|
Downloads
Technical Information
| Contact type | C / change-over contact |
|---|---|
| Contact load | Max. 3 W |
| DC switching current | Max. 0.2 A |
| Switching voltage | Max. DC 30 V |
| Color | white |
| Colors | See “Product versions” |
| Dimensions | ø 6 x 30 mm |
| Connection cable | LIYY 5 x 0.14 mm² |
| Approvals | G 191524, VdS B, opening state monitoring |
| Clear response distance | side: 18 mm / front: 13 mm |
| Housing material | Kunststoff |
Article number: 1300840
Variants
| Delivery contents |
|---|
Mounts
| Type | Picture | Application |
|---|---|---|
|
M 11 37
Receptive clip for switch and/or magnet |
|
Parallel installation |
|
M 11 35
Fork sensor for swivel lock |
|
Installation in swivel dead bolt locks |
|
M 11 40
Surface mount housing for switch and/or magnet |
|
For recessmount magneticcontacts |
|
M 11 46
Installation part for switch and/or magnet |
|
Installation into hollow chamber profiles |
|
M 11 48
Installation part for switch and/or magnet |
|
Installation into steel |
|
M 11 42
Eccentric plug 20 mm for switch and/or magnet M 11 43 Eccentric plug 15 mm for switch and/or magnet |
|
Installation inwindow or door Installation inwindow or door |
|
M 14 03
Installation part for switch and/or magnet |
|
Installation into hollow chamber profiles |