Combined lock and opening state monitoring VdS Cl. B
100 10 30 C
Recess-mounted magnetic contact for opening detection that can be used in different ways as a change-over contact. The large number of combinable installation parts (see “Possible installation parts”) makes this contact suitable for use in many applications depending on the environmental requirements.
Notes
| With special magnets, this product can also be used for combined lock and opening state monitoring. For more information, see the chapters with the same names. |
|---|
Downloads
Attributes
| Approvals | G191524,G190050 |
|---|---|
| Cable length | 6 m |
| Connection cable | LIYY 5 x 0.14 mm² |
| Contact capacity | Max. 3 W |
| Contact type | C / change-over contact |
| DC switching current | Max. 0.2 A |
| Dimensions | ø 6 x 30 mm |
| Protection category | IP 67 |
| Switching distance | 29 mm |
| Switching voltage | Max. DC 30 V |
Packaging
| Packaging Unit | 1 Switch without magnet |
|---|
Accessories
| Type | Picture | Application |
|---|---|---|
|
M 11 37 Parallel installation |
|
Receptive clip for switch and/or magnet |
|
M 11 40 For recessmount magneticcontacts |
|
Surface mount housing for switch and/or magnet |
|
M 11 42 Installation inwindow or door |
|
Eccentric plug 20 mm for switch and/or magnet |
|
M 11 43 Installation inwindow or door |
|
Eccentric plug 15 mm for switch and/or magnet |
|
M 11 46 Installation into hollow chamber profiles |
|
Installation part for switch and/or magnet |
|
M 11 48 Installation into steel |
|
Installation part for switch and/or magnet |
|
M 14 03 Installation into hollow chamber profiles |
|
Installation part for switch and/or magnet |