100 10 30 C G2

Article Nr.: 1300654

Together with the appropriate magnet (see possible combinations), which is affixed to the lock state element (e.g. push rod), this magnetic switch (change-over contact) forms a lock state monitoring solution that meets the requirements of VdS-class C.

Notes

With special magnets, this product can also be used for combined lock and opening state monitoring. For more information, see the chapters with the same names.

Downloads

Attributes

Approvals G 191518: Combined opening and locking monitoring, VdS Class B, EN 50131-2-6 Grade 2; G 190050: Locking state monitoring, VdS Class C
Cable length 4 m
Colors brown
Connection cable LIYY 5 x 0.14 mm²
Contact capacity Max. 3 W
Contact type CO (Change Over)
DC switching current Max. 200 mA
Dimensions ø 6 x 30 mm
Housing material S-B oder A-B-S
Protection category VdS environmental class III, EN environmental class IIIA, IP67
Switching distance 25 mm ± 4 mm
Switching voltage Max. 30 V DC
Temperature range -40 °C to +70 °C

Packaging

Packaging Unit 1 Switch without magnet

Accessories

Type Picture Application
M 11 35
Installation in swivel dead bolt locks

Fork sensor for swivel lock
M 11 37
Parallel installation

Receptive clip for switch and/or magnet
M 11 40
For recessmount magneticcontacts

Surface mount housing for switch and/or magnet
M 11 42
Installation inwindow or door

Eccentric plug 20 mm for switch and/or magnet
M 11 43
Installation inwindow or door

Eccentric plug 15 mm for switch and/or magnet
M 11 46
Installation into hollow chamber profiles

Installation part for switch and/or magnet
M 11 48
Installation into steel

Installation part for switch and/or magnet
M 14 03
Installation into hollow chamber profiles

Installation part for switch and/or magnet
100 57 MD
100 65 MD
100 66 MD
100 67 MD
100 68 MD
100 63 MD
100 61 MDK
100 62 MDK

We’re always there for you

Address

Bahnhofsallee 59 – 61, 35510 Butzbach, Germany

Phone

+ 49 (0) 60 33 / 9 74 04-0

Fax

+49 (0) 60 33 / 974 04-20